SIMATIC S7-300 Shield Terminal for Two Cables 2 … 6 mm, Package of 2
Shield terminal for 2 cables, 2-6mm diameter range, 2 units per packing unit. [VERIFIED via Siemens official datasheet]
Showing 481–496 of 552 results

Shield terminal for 2 cables, 2-6mm diameter range, 2 units per packing unit. [VERIFIED via Siemens official datasheet]

Cover sheeting (masking film) for labeling strips on signal modules, petrol-colored, 10 units per pack — protects user-printed paper labels under the front connector. [VERIFIED via Siemens official datasheet]

CPU 412-5H PN/DP — fault-tolerant H-CPU for S7-400H/F/FH systems, 1MB memory (512KB code/512KB data), 5 interfaces (MPI/DP, DP, PN, 2x sync module), firmware V6.0. [VERIFIED via Siemens official datasheet]

CPU 414-3 PN/DP — 4MB work memory (2MB code/2MB data), 3 interfaces (MPI/DP, Ethernet/PROFINET, IF964-DP slot), firmware below V7.0.3 has a known denial-of-service vulnerability (SSA-557541) — verify firmware is updated. [VERIFIED via Siemens official datasheet]

CPU 414F-3 PN/DP — fail-safe CPU, 4MB work memory, SIL3/PLe safety rating, same interface layout as CPU 414-3 PN/DP; firmware below V7.0.3 has a known denial-of-service vulnerability (SSA-557541). [VERIFIED via Siemens official datasheet]

CR3 rack, steel plate — 4 slots, central rack for standard (non-fault-tolerant) systems, has both I/O bus and communication bus, no redundant power supply support. [VERIFIED via Siemens official datasheet]

ER2 expansion rack, aluminum — 9 slots for signal modules and redundant power supply. [VERIFIED via Siemens official datasheet]

FM 451 — 3-channel positioning module for rapid/slow (fast/creep-speed) traverse drives, 24V DC supply, typ. current 550mA, includes configuration package on CD, supports reference cams, reversing cams, flying actual value setting. [VERIFIED via Siemens official datasheet]

FM 453 — 3-channel positioning function module for servo and stepper drive control, 24V DC supply, includes configuration package on CD, supports CNC, absolute value detection, multi-axis positioning, SSI. [VERIFIED via Siemens official datasheet]

FM 455C — 16-channel continuous closed-loop controller module, 8 AI (with thermocouple/2-wire) or 16 AI (with Pt100/4-wire) + 16 DI + 16 AO, 24V DC supply, typ. power loss 12W. [VERIFIED via Siemens official datasheet]

Front connector for signal modules, crimp snap-in contacts, 48-pole — alternative to the screw-terminal version. [VERIFIED via Siemens official datasheet]

Front connector for signal modules, screw-type contacts, 48-pole. [VERIFIED via Siemens official datasheet]

Front connector specifically for SM 431 module 6ES7431-7KF00-0AB0, with reference temperature detection, screw contacts, 48-pole — IMPORTANT: this connector is already included in the standard scope of delivery of that SM 431 module, so a separate purchase is only needed as a replacement spare part. [VERIFIED via Siemens official datasheet]

IM 461-3 receiving interface module — with C-Bus (not K-Bus, as sometimes mislabeled), for non-centralized (remote) rack coupling up to 102m distance, max current 620mA from backplane bus. [VERIFIED via Siemens official datasheet]

IM cable with C-Bus (official Siemens term; not ‘K-Bus’ as sometimes listed), 5m length, approx. 800g, for use with IM 460-3/461-3 distributed coupling. [VERIFIED via Siemens official datasheet]

Labeling sheets, A4 foil, red, 10 sheets per pack, 4 pre-perforated labeling strips per sheet (40 strips total), for laser printer use — red offers fast visual distinction for marking circuits. [VERIFIED via Siemens official datasheet]